Cut cells 390W 395W 400W 405W Monocrystalline Solar Panel

Product Introduction:

Cut cells 390W 395W 400W 405W Monocrystalline Solar Panel. The 34x12 layout shingled cut cells new design 405W eclipse mono solar Pv panel is the result of application of conductive paste that enables novel interconnection technologies. The power output of shingle modules is increased by significantly enhancing the active cell area within the module, decreasing shading and soiling losses, reducing interconnection losses. The encapsulated cells are based on the Passivated Emitter and Rear Cell (PERC) design approach. The module design features a combination of series and parallel connections for each cell to significantly reduce losses when parts of the module surface are shaded or soiled. Shingled module technology offer main advantages in cases where highest power density and good partial shading response is beneficial, where the latter is satisfied best by the matrix layout.

Send Inquiry

Chat Now

Description

Technical Parameters

【Product introduction】
Cell	Mono 156.75mmx31.2mm High Efficiency Solar Cell
No. of cells	408（34×12）
Rated Maximum Power(Pmax)	405W
Junction Box	IP67
Maximum System Voltage	1000V/1500V DC(IEC)
Operating Temperature	-40℃～+85℃
Dimensions	1941mm×1048mm×40mm
Weight	23kg±3%

【Product description】

Cut cells 390W 395W 400W 405W Monocrystalline Solar Panel.

The 34x12 layout shingled cut cells new design 405W eclipse mono solar Pv panel is the result of application of conductive paste that enables novel interconnection technologies.

The power output of shingle modules is increased by significantly enhancing the active cell area within the module, decreasing shading and soiling losses, reducing interconnection losses.

The encapsulated cells are based on the Passivated Emitter and Rear Cell (PERC) design approach. The module design features a combination of series and parallel connections for each cell to significantly reduce losses when parts of the module surface are shaded or soiled.

Shingled module technology offer main advantages in cases where highest power density and good partial shading response is beneficial, where the latter is satisfied best by the matrix layout.

1 KEY FEATURES

34x12 Cut Cells 405W Solar Pv Panel Excel1

2 MECHANICAL DIAGRAMS

119

3 ELECTRICAL PARAMETERS at STC

Rated Maximum Power(Pmax) [W]	390	395	400	405
Open Circuit Voltage(Voc) [V]	44.71	44.91	45.12	45.32
Maximum Power Voltage(Vmp) [V]	36.80	37.01	37.21	37.41
Short Circuit Current(Isc) [A]	11.16	11.24	11.33	11.41
Maximum Power Current(Imp) [A]	10.60	10.67	10.75	10.82
Module Efficiency [%]	19.17	19.42	19.66	19.91
Power Tolerance	0~+5W
Temperature Coefficient of Isc(α_Isc)	0.05%/℃
Temperature Coefficient of Voc(β_Voc)	-0.275%/℃
Temperature Coefficient of Pmax(γ_Pmp)	-0.368%/℃
STC	Irradiance 1000W/m², cell temperature 25℃, AM1.5G

Solar panel is a device that directly or indirectly converts Solar radiation energy into electricity through photoelectric effect or photochemical effect by absorbing sunlight. The main material of most Solar panels is "silicon".

Hot Tags: Cut cells 390W 395W 400W 405W Monocrystalline Solar Panel, China, suppliers, manufacturers, factory, made in China